Minimum chair injection machine is HCK 600.
The production of plastic chairs generally requires injection molding machines of 600-1000 tons or higher tonnage, rather than 150-500 tons.
Due to the small size of the children’s chair, a machine of about 600 tons is needed to meet the requirements,
which is already a minimum injection molding machine for the production of chairs.
The main thing in choosing the injection machine for a chair
Make sure the chair mold size is smaller than machine tie bar distance.
We have to make sure that the chair mold can be loaded into the injection molding machine.
If it’s a children’s chair, the machine can be smaller, as the mold size is small.
Haichen has a lot of experience with chair injection molding machines.
Plastic Chair
The design of the plastic chair should not only meet the requirements of use,
but also conform to the characteristics of the plastic molding process, and make the mould structure as simple as possible.
In this way, even if the minimum injection molding machine is selected to produce plastic chairs,
the molding process can be stabilized, the quality of plastic chairs can be guaranteed, and the production cost can be reduced.
Injection molding machines
The injection molding machines capable of manufacturing plastic chairs vary depending on the size, style, and complexity of the chair being made.
Generally speaking, injection molding machines are most suitable for producing plastic chairs.
Injection molding machine, which has become more common in recent years due to its speed,
Precision and energy efficiency compared to older models of injection molding machine technology.
Injection molding machine uses electricity instead of hydraulics during the injection process,
thus making it one of the most effective ways to produce high-impact products with precise details while reducing costs.
Adult chairs
Adult chairs or chairs with complex structures require machines of 800-1000 tons or more to meet good productivity and quality requirements.
Oversized or high-volume chairs usually require 2 or more machines of 1000 tons or more to be produced at the same time,
or to use very large machines of 1500 tons or more.
Chair moulds
For chair moulds, these oversized machines can easily drive oversized moulds with more than 10 cavities to achieve very high throughput.
The minimum injection molding machine to produce a plastic chair is machine 600 ton .
In addition to larger tonnage, these oversized machines offer higher maximum shot sizes,
maximum mould sizes, and closure forces to meet the requirements of a wide range of large chair molds.
Haichen Applications
In practical applications, the selection and use of injection molding machines need to be in accordance with specific production needs.
For example, for high-precision and high-quality socket plate production,
an injection molding machine with advanced mold technology and a precision control system may be required.
At the same time, the parameter setting during the injection molding process,
such as injection speed, holding pressure, etc., also needs to be set according to the material characteristics and product requirements.
